Over the recent years, natural gas extraction in the United States has significantly increased due to technological advances in horizontal drilling and hydraulic fracturing. As per Municipal Code of Chicago, natural gas supply pressure should not be less than 1.5 WC and should have less than 100 percent fluctuation in pressure above the minimum pressure at the inlet. Gases stored in accumulators can go as high as 6,000 psi.
Most commercial and industrial applications require a higher pressure. But service line supply has limitations like regulators, clogged vents, old infrastructure or lengthy distance to the site while cylinders have a pressure limit for safety purposes. Natural Gas Booster Systems provide high-pressure gas (Up to 36,000 psi) to meet your specific industrial needs.
High gas pressures are required in a variety of industrial and commercial zones, including manufacturing plants, restaurants, warehouses, stadiums, offices, or healthcare and educational facilities.
There are several designs mainly two types:
Some gas pressure booster typically has a centrifugal fan which draws the gas through the inlet and throws it out at elevated pressures. Having two sub-types:
Others have a reciprocating pump driven by air actuated pistons.
The boosters are concealed in air-tight stainless steel enclosures. The output pressure gets higher as the ratio increases. A given ratio can be altered by altering piston ratios and so on, labeling the capacity of working of the gas booster. They come with adjustable expansion joints, pressure gauges at inlet and outlet, low inlet pressure switch, heat exchangers, high-quality pressure regulators, and overall enhanced control features. This allows you a dominant control over the discharged pressure as it is the sum of booster throttled pressure plus incoming gas pressure.
Additional cutting-edge features are continually being installed to increase their efficiency and safety while making them economical and easy to use, like:
As we know gas pressure booster systems offer pressures up to 36000 psi, they are a more reliable solution compared to cylinders. They’re easy to maintain and compact. Most of them are robustly sealed with high-grade steel and, thus, are explosion-proof and safe. They’re also eco-friendly and prevent your industry from Inter-state, Chicago-based or UNFCCC bans.
They offer a number of operational benefits:
Gas Boosters are a common part of almost every industry. To supply higher-pressure appliances, it’d be more economical to use gas boosters, as increasing the pressure on the main regulator and fitting individual regulators at each low-pressure appliance would cost more. Due to the wide range of designs, it is best to select booster optimized for your application. A double acting or single acting, single stage or multistage or a combination of these allow you to achieve the best operating pressures and flow capacities. We recommend hiring Chicago MEP engineers to guide you through the process.
Some of the industrial and commercial zones with possible applications are:
Selection of a gas pressure booster that suits your need, is a more critical matter than the selection of a liquid pump. Gas is a compressible medium and is generally unaffected by gravitational force. It is recommended to hover over the following list of questions regarding parameters and make a checklist when determining the ideal gas booster for your firm.
Make a selection on pressure first, and then make a selection of the required flow rate based on the gas supply pressure.
For an accurate gas booster selection, it is recommended to hire Chicago MEP Engineers. It allows you to get additional support and compliance with section 414.3 of Gas Piping Installation, of the International Fuel Gas Code. Engineers have specially developed computer programs to accurately calculate and judge the right booster installation for your desired application.
A gas booster shouldn’t be turned on without gas being directed through it. Make sure contamination levels are at their lowest in the gas. Most importantly, give proper time and attention to servicing.