In recent decades, many building owners have become more interested in saving energy, conserving water, and reducing their environmental footprint in general. However, designing buildings that are healthy for occupants is also important, and this has been emphasized by the coronavirus outbreak. We spend 90% of our time indoors, according to the US Environmental Protection Agency, and indoor air is typically 2 to 5 times more polluted than outdoor air.
Viruses are just one of many airborne threats that affect humans. Other hazards of biological origin include bacteria, mold spores, dust mites, and pollen. Negative health effects have also been identified for substances like volatile organic compounds (VOC), particulate matter (PM), and nitrogen oxides (NOx). Carbon monoxide is especially dangerous since a concentration of only 1% in the air causes loss of consciousness within minutes, and possibly death.
Every building design is unique, but there are three main strategies to improve air quality:
The most cost-effective approach is minimizing air pollution sources first, and then optimizing ventilation and air purification. The removal of air pollution sources brings a passive benefit, while the other two methods have an ongoing energy cost.
Current efforts to improve air quality are focusing on coronavirus prevention. However, many other airborne hazards often get ignored. For example, volatile organic compounds are off-gassed by many construction materials and furniture, especially when new.
Indoor air quality starts with selecting the right construction materials during the design phase. Many common construction materials are now available in low VOC versions. If you are planning to get the LEED certification for your next building project, these low-emitting materials can help you score points.
All equipment and appliances that use combustion must have adequate venting since combustion releases many harmful substances. Carbon monoxide is especially dangerous, being highly poisonous to humans.
Air humidity is not a pollutant, but air quality is negatively affected when humidity is not controlled. Harmful organisms like mold, dust mites, and bacteria thrive with high moisture levels. On the other hand, viruses and other harmful particles stay airborne for longer with low humidity. For these reasons, the US EPA and ASHRAE recommend a relative humidity of 30% to 60%.
Regardless of how air moisture affects the new coronavirus, the air quality benefits of keeping a moderate RH have been widely studied.
Building ventilation systems are normally designed with prescriptive airflow values from ASHRAE standards. These values have been determined experimentally by ASHRAE, based on the type of building, floor area, and number of occupants. However, this is an indirect design approach, since ventilation systems don’t respond directly to air pollution levels.
The following design features can make ventilation systems smarter, and more capable of controlling indoor air quality:
Many building codes have established the prescriptive airflow values from ASHRAE as minimum requirements. When using smart ventilation controls, they must be configured to never reduce airflow below the values required by codes.
To deal with airborne pathogens, the combination of filtering and ultraviolet radiation is an effective addition to ventilation systems:
Indoor air quality improvements can help control respiratory illnesses in building interiors. However, keep in mind that IAQ measures are not a substitute for the guidelines from health authorities, such as social distancing and frequent handwashing.